Home About Us Contact Us Privacy Policy Return Policy View My Cart
 

Search
Go

Category
Brands
 
Stanley 10-049 Pocket Knife
Email a friendView larger image

Stanley 10-049 Pocket Knife

List Price: $11.66
Our Price: $10.47
You Save: $1.19 (10%)
SKU:

341758

In Stock
Usually ships in 3-4 business days
Description:

Pocket knife. Rugged, zinc die-cast knife with cutlery stainless steel blade. Safety lock feature. Comfortably designed grip adds to performance. Blade replaceable in seconds. (Accepts model No. 11-040 or 11-041 replacement blades).

Features:

Pocket knife


Rugged, zinc die-cast knife with cutlery stainless steel blade


Safety lock feature


Comfortably designed grip adds to performance


Blade replaceable in seconds


Product Details:
Product Length: 6.9 inches
Product Width: 2.9 inches
Product Height: 0.5 inches
Product Weight: 0.7 pounds
Package Length: 3.8 inches
Package Width: 2.4 inches
Package Height: 0.3 inches
Package Weight: 0.1 pounds
Average Customer Rating: based on 12 reviews
You may also like ...
Stanley 11-041 Utility Blade
Stanley 11-041 Utility Blade
$4.13
Customer Reviews:
Average Customer Review: 4.5 ( 12 customer reviews )
Write an online review and share your thoughts with other customers.


Most Helpful Customer Reviews

6 of 6 found the following review helpful:

3Good tool, but not perfectSep 11, 2011
By A. Cruz
This review is for the Stanley 10-049 Pocket Knife with Rotating Blade Stanley 10-049 Pocket Knife with Rotating Blade.
I have owned this pocket knife since December 2009.

This knife makes a good tool, but there are some downfalls of the design.

The Blade
The blade is a modified sheepsfoot blade. The modification that Stanley made creates a thinner, sharper tip than a traditional sheepsfoot blade. This blade resembles a disposable razor blade, and cuts similarly to one. The blade does not use a standard "V-Grind" that many pocket knives use. This knife uses a V-Grind with a micro-bevel. This micro-bevel causes the knife to be very sharp, at the cost of edge retention. The blade on my knife, has a tendency to hit the handle when closing. I tried adjusting the pivot screw. The screw was either secure and the blade hit the handle occasionally, or the screw was too loose and could come out during use.

The Steel
The edge retention, as with your average razor blade, is poor. However, due to the thinness of this knife and the grind, when I would consider this knife dull, it still cuts decently. I have never bothered buying replacement blades, and instead, I sharpen the original blade. The blade has been sharpened at least 10 times and the edge is in good condition. If you are able, I recommend sharpening the blade, as opposed to buying a new one.

The Handle
The powder-coating on this knife makes the knife too slick. I assume that this coating is to make the handle appear to be metal, when it's plastic, epoxy handle according to the Stanley website. Due to the slickness of this knife and the small finger choil, your hand is likely to slip into the blade. I recommend wearing a glove every time you use this knife.

The Lock
The lock on this knife has a fairly strong spring. This makes the knife lock always engage when opened due to the spring tension. This spring also keeps the blade from opening. This lock works similarly to that of a back lock does. When the knife opens, a piece of plastic slides in between the knife tang and the inner handle, preventing the knife from closing. This design is a bit weak. The blade rattles and if you apply a bit of force to try and close the knife, the plastic piece inside flexes.

Overall Construction
The overall construction of this knife is decent, but not great. the powder coat is not uniform, the texturing does not add enough grip to the knife. The Stanley logo has the most grip. The lock is weak, but if you are responsible, the lock should hold up fine. The finger choil is too shallow. The blade steel is that of a typical razor blade. if you are happy with how razor blades perform, you may like this knife as well.

Conclusion
This is a good tool, but some things need to be changed before I would recommend this knife to everyone.

Suggestions for Improvement: Make the finger choil deeper, use a piece of steel to lock the blade into place, texture the handle better, and adjust how the blade is held by the pivot screw to prevent the blade from getting damaged while closing.

Note: review is subject to change, this is usually due to grammar/punctuation edits to improve over all coherence. Changes may also be made to add to the review, or remove that which I determine unnecessary. If you have any constructive comments, or constructive criticisms, feel free to leave a comment on my review.

3 of 3 found the following review helpful:

5Using the Stanley 1-0049 in Packing PlasticsJun 16, 2001
By Tommye Schoenberger
My husband uses his Stanley 10-049 for general use and while packing plastic products at work, where it gets use constantly. It holds up well and cuts through tape and cardboard boxes all night long. Working 7 days a week for 8 hours or more it went over 6 months before needing a new blade! A simple, quality pocket knife.

4 of 5 found the following review helpful:

5Stanley pocket knife-chosen over allAug 03, 2000

I work in a production greenhouse where having the right knife makes all the differance.We use the Stanley pocket knife to propagate several hundred thousands of cuttings a year. This knife lasts through our busiest seasons and then keeps going. The size is perfect to fit a small hand. The blade is easy to change and inexpensive too! Of our modest crew, all use the Stanley pocket knife, even when they could choose a more expensive type. It is very versitile, and has been used in all aspects of the business, from taking delicate cuttings to slicing open huge soil bags. When the day is over, I take my Stanley knife home with me and find it does even more jobs there than at work! The hardest part is that we can't buy them locally, as our hardware store no longer open. I was sure happy to find them on Amazon.com! Will they some day come in colors so we can tell our Stanley pocket knives apart? Hope so!

1 of 1 found the following review helpful:

5Still great after 12 years!!!Jun 01, 2011
By S. Warren
I picked up three of these about 12 years ago thinking that they were a cheap throw away knife that I'd have to replace. I still have all three!!! One sits in my desk, one in my car and one in my backpack.

The blades are razor sharp when new/ replaced... but they still keep a decent edge to them. I haven't replaced the blades in about 8 years but they still keep up with all of my needs!

1 of 1 found the following review helpful:

5Outstanding knifeDec 27, 2010
By Nancy Stislow
I have owned my 10-049 for over 25 years. I purchased it when working to simply open boxes on a job. Instead I found I used that knife for EVERYTHING. As a crafter, I do all my cutting with my Stanley- the blade lasts forever even with daily cutting of paper and plastics. On bicycle tours it was invaluable. We even used it to cut pizza in lieu of silverware. This is the single most useful tool one can own and blades are very easy to find- AND economical. I intend to get one for other family members like myself who do not want the hassle of sharpening blades.

See all 12 customer reviews on Amazon.com
About Us   Contact Us
Privacy Policy Copyright © , BIC Superstore. All rights reserved.
HARDWARE

Visit our full line of door parts, window parts, locks, lock sets, closers, hinges, shelf brackets, casters, etc. Choose from a variety of suppliers like Amerock products...

HOUSEWARE

We carry thousands of items like adhesives, sealants, outdoor products, paint, paint ac cessories, lighting, electrical, janitorial, building materials. Different manufacturers...

TOOLS

Your right choice for all your needs including precision, abrasives, grinding, machine, power, cutting, plumbing, welding, lubricants. Manufactured by Bosch, Delta,...

GENERAL SUPPLIES

We've got what you're looking for, Industrial & commercial products, Fasteners, safety, maintenance products, pumps, pipes, valves, fittings, heating, hvac, material handling, Construction...

Copyright 2008 Bic Superstore. All rights reserved. Website Design by Atmosphere Solutions, LLC