Home | View Cart | My Account | Order Status

Search

Housewares and small appliances

Builders hardware, hinges, door knobs

Do It Best Import/Toilet Seats

Shop-Vac<reg> 952-02-62 5 Gallon Hang Up Vac

Shop-Vac 952-02-62 5 Gallon Hang Up Vac

(100 customer reviews)

List Price:	$122.12
Our Price:	$97.63
You Save:	$24.49 (20%)

SKU:

395242

In Stock

Usually ships in 1-2 business days

Description:

5gl hang-up wet/dry vac. Space saving Hang-Up design gives centralized cleaning convenience for garage, workshop, hobby area, or laundry room. 4.5 HP motor with super quiet housing. Top carrying handle for easy mobility. Space saving wall mount is easy

Features:

•

5gl hang-up wet/dry vac

•

Space saving Hang-Up design gives centralized cleaning convenience for garage, workshop, hobby area

•

4.5 HP motor with super quiet housing

•

Top carrying handle for easy mobility

•

Space saving wall mount is easy to install and easy removal from wall bracket for emptying or portab

Product Details:

Product Length:	0.0 inches
Product Width:	0.0 inches
Product Height:	0.0 inches
Product Weight:	15.13 pounds
Package Length:	27.6 inches
Package Width:	13.1 inches
Package Height:	12.8 inches
Package Weight:	15.3 pounds
Average Customer Rating:	based on 100 reviews

You may also like ...

Shop-Vac<reg> 903-98-00 Hang-Up Vac Replacement Filter

Shop-Vac 903-98-00 Hang-Up Vac Replacement Filter

$11.50

Shop-Vac<reg> 9193200 Hang Up Vac Disposable Collection Filter Bag

Shop-Vac 9193200 Hang Up Vac Disposable Collection Filter Bag

$8.13

Shop-Vac 801-89-62 Micro Tool Kit

$21.36

Customer Reviews:

Average Customer Review: 4.0

( 100 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

255 of 256 found the following review helpful:

STRONG...BUT NOISYDec 12, 2002
By KRASSEL
I originally purchased this vac in 2002. I mostly use this little vac on a 21/2 inch dust collection system for my table saw and miter saw. It does a real good job of removing dust and chips from the two tools. I have it hanging on a 10x10 post to one side of my small shop and can vacuum the whole shop floor with the 18 foot vac hose that came with the machine. It has a good selection of tools and filter replacement is fast and easy. However, it is noisy. It actually drowns out the sound of my table saw. The 4" Delta dust collector I use for my planer and jointer is actually quieter than this little vac. I will continue to use it (maybe build a sound box for it), because it does do a great job. Except for the noise level, I would reccommend it to anyone.
An update...Nov. 2004...8 months after I got this machine it started making strange growling sounds at shutdown, and was getting very hot. I called Shop Vac's customer service and the rep was extremely helpful. She told me to put it in the orig box and ship it back to them and they would replace or repair it free. I commented that the orig box was long gone, and could I use a generic box. She said never mind, we will send you a new unit and you put the old one in that box and send it back. Three days later the new machine showed up, I unpacked it and repacked the old one, applied the shipping label they supplied and sent it back. The replacement machine has worked flawlessly now for about a year and a half. Want to thank Shop Vac for their excellent customer service.
Update...April 2005..This little vac is still hanging on it's post and doing a great job. It probably averages 2-3 hours of run time every day and has performed perfectly. It now only services the miter saw, r/o sanders, large disc sander and of course cleaning the shop( everything else is on the 4"). Still highly recommend this vac...it is a great little tool.
UPDATE...JANUARY 2007..It's still hanging on its post and still doing a great job. Ya gotta love a machine that keeps on delivering great performance year after year. Still highly recommend this vac.
STILL JAN 2007...shortly after writing the update above my little vac began to make weird noises at shutdown. I contacted my local repair shop and was told if they had to get into the motor it would cost over $100 to repair. They recommended that I contact Shopvac direct. I called the 1-800 number and after speaking to a very nice young lady, discovered I could purchase a new motor for $40, including shipping. Needless to say I ordered one. It took about ten days to arrive in the mail and took less than 15 minutes to install. My little vac is once again doing its job, still hanging on the same post for over five years. I think any electrical appliance that will last five years with the use and abuse this one has had is a great machine. Still highly recommend.

154 of 156 found the following review helpful:

shop-vac hangup 4.5 hpApr 19, 2001
By JOHN D. BEATTY
I bought 3 of these units for Christmas presents, including myself. The product was so new that the store personnel had no feedback, so I took a chance. We love it ! The portability is fantastic. My son has his hanging on the wall in his workshop and takes it off the convenient wall holder to use in other areas. I haven't bothered to attach my holder, as I carry it all over the house, garage and Suburban. The long hose and cord make it much easier to use than a normal shop-vac which I also own. The regular shop-vacs are a pain to pull after you, while this unit enables you to cover alot of area before you have to move it The suction is strong. It has a slim shape so fits into tight areas or stores easily. Changing a filter takes about 30 seconds. It is beautifully designed to carry about. I will buy more of these in the future.

78 of 84 found the following review helpful:

Small hose, Noisy, Underpowered, and CLOGS EASILYJul 27, 2005
By NJ Educator
Received my "hangup" vacuum a few weeks ago. I used it for some light duty vacuuming down in the basement. After putting up a wall and cutting drywall I figured I'd use it to vacuum the dust and pieces of drywall on the floor. It does great with dust, but who vacuums dust with a shop vac? Unfortunately the hose is too small (narrow) and since the hose is so long it clogs VERY easily. And when it clogs it overheats. After about the 10th clog I packed it back up and sent it back to Amazon. I instead ordered the 6.5 peak horsepower model (925-42-10) for $99.99 (has a 2.5" hose instead of this rinky dink one). It's MUCH quieter, MUCH stronger, and has not clogged even once. I'm giving this two stars because I am disappointed with the power, noise, size of the hose, and pretty much everything else about the vacuum. The only good thing is the variety of attachments you get. But who can vacuum with an attachment that only gives you an opening of about 1/2" (crevice tool)?? If you're just going to vacuum out your car or some dust then this is ok for you. If you want a "shop vac" like the name says...then forget about this one.

20 of 20 found the following review helpful:

Super shop-vacOct 01, 2003
By Dennis G. Blair
What A wonderful wonderful, vacuum. WHAT POWER!!!! Every garage in America should have this. This Shop-Vac does not miss any dust. You have got to give this A try!!!!

24 of 25 found the following review helpful:

weak for wood shopOct 09, 2004
By Ralph
OK for general dust collection but noisy. Clogs easily on wood chips. I was pretty dissapointed for my application. Might be Ok in a garage for cars but overall not very powerful for all the noise it produces. Look elsewhere

See all 100 customer reviews on Amazon.com