Home | View Cart | My Account | Order Status

Search

Housewares and small appliances

Builders hardware, hinges, door knobs

Do It Best Import/Toilet Seats

Robt. Bosch Tool PR20EVSK Palm-Grip Router

Robt. Bosch Tool PR20EVSK Palm-Grip Router

(125 customer reviews)

List Price:	$225.00
Our Price:	$138.00
You Save:	$87.00 (39%)

SKU:

338511

In Stock

Usually ships in 1-2 business days

Description:

Palm grip 5.7a router. Variable speed palm-grip router. 16,000 RPM. 1.0 HP. 5.7A motor. Microfine depth adjustment dial. Externally accessible brush caps. Soft-start motor. Quick clamp system for easy base removal. Spindle lock. Phenolic subbase and alu

Features:

•

Palm grip 5.7a router

•

Variable speed palm-grip router

•

16,000 RPM

•

1.0 HP

•

5.7A motor

Product Details:

Product Length:	15.0 inches
Product Width:	13.0 inches
Product Height:	8.0 inches
Product Weight:	0.0 pounds
Package Length:	15.7 inches
Package Width:	14.2 inches
Package Height:	4.5 inches
Package Weight:	8.6 pounds
Average Customer Rating:	based on 125 reviews

You may also like ...

Culligan FM15RA Culligan Faucet Drinking Water Filter Cartridge

$15.51

Customer Reviews:

Average Customer Review: 4.0

( 125 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

150 of 152 found the following review helpful:

Good toolMay 29, 2007
By D. Tran
I already own three other "full size" routers so this little router is quite a pleasant surprise to use. It is light weight and very solid; hinge-mortising, edge-triming, and rounding-over are a breeze. I also bought the round subbase so that it can be used with my Porter-Cable templet guide set and it works out quite nicely. So why is only 3-stars? As mentioned by other reviewers, the "Shaft-Locking Button" does not hold and needs to be redesigned. It was the most frustrated thing that I ever dealed with; installing bit is no problem but removing bit was an entirely different story. The button just would not lock tight enough and kept slipping! After sore thumbs and bruised knuckles, I saw in the manual (page 7) suggesting to use a "thin" 10mm wrench as an alternative to the shaft locking button . Out of frustration I took one 10mm wrench from my inexpensive wrench set, grinded it a bit thinner so that it would fit on the flats of the spindle. Now I can easily install or remove bits using two wrenches. BOSCH either needs to redesign the shaft locking button or supply an additional $2.00 wrench!

57 of 59 found the following review helpful:

Best ChoiceFeb 14, 2007
By Robert S. Digh
I have used the Colt in my furniture business and found it to be of the best quaility. Problems I have read about in some of the reveiws were found to be non-existent. They arise from operator error in use. Example, the chuck and bit are indeed 90 degrees to the base when mounted, however, if you do not twist the motor into the lock position after setting the height and lock it, it will be off by approx. 1 degree.

As with many tools out today, the manufactors have a reason for suppling instructions for use. Small procedures left out in operation which result in poor results are often blamed on the tool.

Like the old saying goes, " If you make it idiot proof, they just make a better idiot." Buy this tool and you can not go wrong when it is used for what it was intended.

75 of 80 found the following review helpful:

Wonderful Tool - Must BuyFeb 09, 2006
By Alan Dale Daniel
I have been using my new Colt router for a month now and it is a wonderful addition to my shop. I have a large bench mounted router, but this tool is now being used more often than the more powerful cousin. It is so easy to route edges, especailly for rounding over or using the flush cut router bit. Put the box or other item you want to rout on a pad made for holding the work and just cut away. The Colt is very easy to control.

Making hinge morteses is a snap because the router doesn't grab or try to move off track. You can use the edge guide to help you make the mortese straight. All of the cutting so far has been in red oak and oak vineer plywood. It performs well in both.

The bits are easy to change, and the depth is easy to set. A well thought out tool and well worth the price. I use it all the time in my shop now. I wouldn't be without it.

AD2

22 of 22 found the following review helpful:

Convenience and Time SavingFeb 06, 2006
By Jason T. Amsden
I bought this little router a couple of months ago and it is very convenient. I just routed some edges on some drawers and it is all very easy and less cumbersome with this tool...almost to the point that I use it when I shouldn't. I routed the edges with the drawers still in the slides. I wish there was an option to get a longer length fence. Keep in mind that the max size bit I have fit into this thing is a 1/2" roundover bit, so it is not a replacement for a "real" router, but I am very glad I bought it.

19 of 19 found the following review helpful:

Router slips in the baseOct 08, 2009
By Nathaniel Gruenwald
A quick read of all the one star reviews pretty consistently identify the flaw with this router: the base mount/ depth adjustment is terrible! Although this is perhaps one of the only flaws, it is the most critical-- anyone who has watched their fine work mercilessly destroyed in seconds when the router slips in the base has felt the pain.

Despite tightening the adjustment for the cam lock that holds the motor in the base, the router would still slip. Sometimes that meant that the depth of cut kept increasing and other times it meant that the base became off-centered. When it became off-center, the bit usually grabbed violently, thus stalling the motor. Whatever I tried, I couldn't seem to stop this from happening. It was less than a year before the motor burned out as a result, which in the end was a blessing, because I was tired of nasty surprises and trashed projects. I was happy when I threw the POS in the trash. One last criticism, the base doesn't accept standard bushings, although it is easy to make an after market base.

I'm a contractor and professional carpenter. In the past, I have always thought highly of Bosch and I still love their C-20 Sidewinder, but lately all my Bosch tools seem to bite it pretty quickly. This router is just another example of a flawed and short lived product.

Do Not Buy.

See all 125 customer reviews on Amazon.com