Home | View Cart | My Account | Order Status

Search

Gas heaters and logs

Home »

Mr. Heater F271803 Big Buddy Hose

Mr. Heater F271803 Big Buddy Hose

(31 customer reviews)

List Price:
Our Price:	$61.21
You Save:

SKU:

448095

In Stock

Usually ships in 3-4 business days

Description:

Big buddy hose w/reg. 12' hose for use with Big Buddy heater. With regulator and quick connect.

Features:

•

Big buddy hose w/reg

•

12' hose for use with Big Buddy heater

•

With regulator and quick connect.

Product Details:

Product Length:	11.0 inches
Product Width:	3.0 inches
Product Height:	10.0 inches
Product Weight:	2.0 pounds
Package Length:	10.7 inches
Package Width:	9.5 inches
Package Height:	3.0 inches
Package Weight:	2.05 pounds
Average Customer Rating:	based on 31 reviews

You may also like ...

Mr. Heater F276172 Propane Tank Refill Adaptor

$23.40

Mr. Heater F273699 Buddy heater Fuel Filter

$12.63

Mr. Heater F273702 Hose Assembly

$43.49

Customer Reviews:

Average Customer Review: 4.5

( 31 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

112 of 115 found the following review helpful:

Product information from Mr. Heater companyApr 09, 2010
By Mamacita
I was confused about the hose options so I contacted Mr. Heater to get the scoop. I have not actually used the hose myself (so the 4 star was arbitrary...seems like this is the way to go, tho'), but I wanted to share what the company said. (Please note that the product manuals for the Mr Buddy heaters are available on their website at the specific product link). My initial question and the company response follow, including the contact info for the company rep that sent me the information:

Initial question to Mr. Heater:
amazon.com advertizes that the plasticizer-free green hose(f273704) can be used with both the portable buddy and big buddy, but I don't see it listed in the big buddy manual. Is it compatible with both? Also, is the quick disconnect hose (F271803) compatible with both the big buddy and the portable buddy? Does this hose require use of a fuelfilter? If no, why not? Is it made of materials that will not degrade like the f273704 hose?

Response from Mr. Heater:
When you connect any of our Buddy model heaters to a remote propane tank, that tank can have over 120 PSI of pressure inside it.
This high pressure in the rubber hose connected to the heater can squeeze a plasticizer or an oil out of the rubber in the hose and once it gets into the heater it is trapped and will plug up the tubes and cause the heater to be an unreliable unit.

We came up with a fuel filter to prevent this oily substance from getting into the heater when using a high pressure hose.

The hose manufacturers came up with a hose that doesn't have the plasticizers in it so NO filter is needed (our part number for this plasticizer hose is F273704).
BUT the draw back with this hose is with no plasticizers in the rubber it causes the hose to be very stiff especially in cold weather. So you don't need the filter but you have to work with a hose that doesn't like to straighten out or is more difficult to work with because of this stiffness.

As far as the hose with the quick coupler, this is only available to be used on the Big Buddy MH18B heaters. The Big Buddy has two built in regulators but also has a male quick coupler built-in that by-passes these two regulators so if you have a regulated propane supply like in an RV or your house, you can use our hose to connect to this low pressure source (all low pressure is less than 1/2 PSI of pressure).

We also have a hose for the Big Buddy that has the quick coupler connection to the heater and a regulator at the connection to the propane tank, like on a barbeque grill.
Because the regulator is mounted directly to the propane tank it reduces the very high 110 PSI of pressure from the tank to the low 1/2 PSI pressure. Because this pressure is so low it will not be able to squeeze out the oily plasticizers from the rubber in the hose and does not need a fuel filter.

Bradford Austin
[...]

36 of 36 found the following review helpful:

Good Value--Doesn't require a filterMar 02, 2010
By DIY Guy "DIY Guy"
This hose costs more than the one without the regulator. However, it has several advantages that have been confirmed by Mr. Heater (I called them):

1) The regulator keeps the pressure coming from the tank into the hose at a very low level, which is safer.

2) You do NOT need to purchase a fuel filter with this hose. The regulator prevents oils from leaving the propane tank and entering your heater where it could do damage. Although you pay more for this hose up front, you don't have to buy fuel filters periodically, which are required with the other hose that doesn't have the regulator.

26 of 26 found the following review helpful:

Bulk cheaper than 1 lb. bottlesFeb 17, 2008
By C. Nitschmann
I chose this quick disconnect hose instead of the hose that connects to the heater's regulator because this hose is equipped with a regulator at the bulk tank end thus reducing the hose pressure to a much safer 1/2 lb. psi. This hose also has a built in filter in the regulator eliminating the purchase of an additional filter.

Preventing 5 stars is the cramped quick connection in the Mr. Heater which points straight down. It would be nice if the quick disconnect also had a swivel outward like the heater's two regulators.

Also you must hold the pilot button for about 90 seconds to allow the gas to travel the length of the 12' hose to reach the heater.

Otherwise I'm pleased wih the product because it allows connection to a large supply of propane which you will need when operating Mr. Heater on high. Also the cost of propane when purchased in 20 lbs. is much cheaper than the 1 lb bottles.

8 of 8 found the following review helpful:

Connection is a snapDec 03, 2009
By M. Villemain
The connection works great, it was a little confusing at first because I thought you connected it to the same area as the small tanks, but on closer inspection I found the "quick connect" fitting inside and behind the other connection, after that it was a snap.

7 of 7 found the following review helpful:

Big Buddy Hoe, regulator & quick disconnect assemblyDec 04, 2010
By Jimmy G
I recently purchased Mr Heaters hose assembly made up with the low pressure regulator and the quick disconnect. When I first installed the hookup to my Big Buddy heater I got no pilot. After rechecking my connections it was clear one has to be very careful to fully install the quick disconnect and give it a pull when connected to see that the fitting is all the way up when installed on the coupler (tight area for a big hand). After installing properly the hose assembly worked great. I checked for leaks and had my leak detector right below the quick disconnect to see if any gas was escaping. Since I really don't trust quick disconnects from leaks, I watched this area very closely.Next I ran the assembly through all range settings on the heater to insure I was getting enough gas and no leaks at a higher output. Again everything worked great. I am quite satisfied with my hookup and the reason for the 4 stars was the hose is made stiff to prevent oils etc from getting through to the heater. This is not a big deal for this temperature 55° but in extremely cold weather it will be a bit of a pain I can live with by keeping it warm until after I hook it up. The only additional add on I purchased was the 6 volt AC fan hookup onto the back of my big buddy. Since I use a large inverter this is a sweet surprise, no more D batteries.
I hope this will help someone decide on the hose hookup.

See all 31 customer reviews on Amazon.com