Home | View Cart | My Account | Order Status

Search

Milwaukee Accessory

Home »

Milwaukee Accessory 48001430 Grit Edge Sawzall Blade

Milwaukee Accessory 48001430 Grit Edge Sawzall Blade

(9 customer reviews)

List Price:	$25.10
Our Price:	$18.79
You Save:	$6.31 (25%)

SKU:

383813

In Stock

Usually ships in 3-4 business days

Description:

9x3/4x.039 sawzall blade. Coarse tungsten carbide grit edge on bi-metal blade for greater abrasion resistance. For cutting hardwood flooring, cast iron, stainless steel, fiberglass materials, ceramic tile, stone, slate, clay pipe, carbon, brick, plaster

Features:

•

9x3/4x.039 sawzall blade

•

Coarse tungsten carbide grit edge on bi-metal blade for greater abrasion resistance

•

For cutting hardwood flooring, cast iron, stainless steel, fiberglass materials, ceramic tile, stone

•

3 blades per plastic pouch

•

9" x 3/4" x .039

Product Details:

Product Length:	0.2 inches
Product Width:	10.5 inches
Product Height:	1.75 inches
Product Weight:	0.0 pounds
Package Length:	11.3 inches
Package Width:	1.7 inches
Package Height:	0.7 inches
Package Weight:	0.3 pounds
Average Customer Rating:	based on 9 reviews

You may also like ...

Milwaukee Accessory 49221129 12-Piece Sawzall Blade Kit

$34.60

Milwaukee Accessory 48-00-1440 Diamond Grit Torch Sawzall Blade

$15.23

Milwaukee Accessory 48001301 Sawzall Pruning Blade

$23.30

Customer Reviews:

Average Customer Review: 4.0

( 9 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

18 of 18 found the following review helpful:

Cuts Cast Iron Pipe!Jun 12, 2004
By Matthew J. Monahan "redheaddiesel"
These blades are pricey, but they are the best thing I've used yet for cutting cast iron piping during remoding jobs. I've tried metal cutting circular saw blades, metal cutting disks on an angle grinder, other metal cutting reciprocating saw blades and a pneumatic cut off wheel. This not only does the job, but one blade will last long enough to cut many pipes!

5 of 5 found the following review helpful:

Last longer than standard bladesJan 26, 2010
By Thomas F. Goettl
What a difference when cutting up steel last a whole lot longer then a standard blade.

3 of 3 found the following review helpful:

Great for fiberglassDec 23, 2009
By Brian T. Rickman
It only took two of these blades to cut up a 16' fiberglass sail boat.

3 of 4 found the following review helpful:

Very disappointed and incorrect product descriptionSep 22, 2010
By K. Hudson "Technical writer"
The package itself shows that this blade is NOT for cast iron or hard tile. I bought this product to cut through a piece of aluminum channel. Took probably 45 minutes, which was far longer than it took at the metal yard. They did it in about 2 seconds. I like my sawzall Factory-Reconditioned Milwaukee 6538-821 15-Amp Super Sawzall Orbital Reciprocating Saw with Case quite a bit and eventually I got through the channel, but I expected way more out of the blades. I don't find them all that special. Oh, and this might be painfully obvious to most people, but just in case, do NOT use them for wood - they will make a huge mess out of that.

I still have two out of three left, so if I find a good use for them that I would recommend, I will post it. By the way, the package says that these cut:

Fiberglass
Block
Masonry
Plaster
Ceramic tile

The two items shown that they specifically are not able to cut are:
Hard Tile (Grade 5)
Cast Iron

The one that is supposed to cut Cast Iron and Hard Tile (Grade 5) is the diamond Milwaukee 48-00-1440 Sawzall Blade 6" Diamond Grit and Milwaukee 48-00-1450 Sawzall Blade 9" Diamond Grit

Wrong picture and bad descriptionJan 24, 2012
By Alx
I purchased these blades believing they were tungsten tipped blades, as the picture attached shows clearly teeth on the blade, And the description said tungsten carbide.
No where has it said "Carbide grit Blades" as it clearly says on the packets once they were delivered. Misleading info and picture !!

See all 9 customer reviews on Amazon.com