Home | View Cart | My Account | Order Status

Search

Water pumps and parts

Home »

Merrill Mfg. PG200 Steel Pressure Gauge

Merrill Mfg. PG200 Steel Pressure Gauge

(4 customer reviews)

List Price:	$12.35
Our Price:	$3.23
You Save:	$9.12 (74%)

SKU:

430956

In Stock

Usually ships in 3-4 business days

Description:

200psi pressure gauge. Pressure gauges are suitable for air, steam, and other pressure applications that will not deteriorate brass. 2" steel case, rated 0 to 200 P.S.I., with 1/4" NPT Male thread (brass)

Features:

•

200psi pressure gauge

•

Pressure gauges are suitable for air, steam, and other pressure applications that will not deterior

•

2" steel case, rated 0 to 200 P.S.I., with 1/4" NPT Male thread (brass)

Product Details:

Product Weight:	0.22 pounds
Package Length:	2.7 inches
Package Width:	2.2 inches
Package Height:	1.2 inches
Package Weight:	0.2 pounds
Average Customer Rating:	based on 4 reviews

You may also like ...

Campbell Mfg BAV-1/4 Air Intake Valve

$3.16

Rain Bird Corp. Consumer CP-100 Electric In-Line Sprinkler Valve

$18.61

Customer Reviews:

Average Customer Review: 5.0

( 4 customer reviews )
Write an online review and share your thoughts with other customers.

Most Helpful Customer Reviews

2 of 2 found the following review helpful:

Inexpensive way to adjust pressure on a Gaggia espresso machineNov 10, 2011
By Comdet
I used this to adjust the pressure on a Gaggia Classic espresso machine. It's a very simple process: remove the spout from the portafilter, attached the pressure gauge using a 3/8 to 1/4 adapter (also available on Amazon: Lead Free Brass Pipe Fitting, Reducing Coupling, Class 125, 3/8" X 1/4" NPT Female and see what the pressure is. The factory setting on mine was 160 psi (which is about 11 bar). I initially adjusted the pressure to 145 psi (which is about 10 bar), and may go a bit lower after further testing.

There is a marked difference in the espresso quality with proper pressure, and this is an inexpensive way to determine the pressure setting of your machine.

The gauge itself is decent -- about what you would expect at this price point. But, it gets the job done and is very inexpensive!

1 of 1 found the following review helpful:

Good little air pressure gaugeNov 09, 2011
By Timothy Mc
This appears to be a good, steel air pressure gauge. It arrived within a few days of ordering it. After the application of a little teflon pipe tape, the gauge was screwed into an air pressure regulator. The regulator was adjusted to where the gauge showed 90 psi. Without any way to check the accuracy of the gauge, one can only presume that it is accurate. The gauge did not leak and appears to be of good quality. I have no complaints against it at the present time.

simple, inexpensive, qualityOct 27, 2011
By Eagle eye mike
these gauges are much better than the ones i replaced them with, very good quality for the price
good gauges can save a lot of work from having to be done a second time (think automotive paint?!?)

0 of 1 found the following review helpful:

Does the job for few bucks.Sep 07, 2008
By z-wave Guy "z-wave Guy"
Got delivered quick and did the job to check my static shower pressure... Would buy it again!