Home About Us Contact Us Privacy Policy Return Policy View My Cart
 

Search
Go

Category
Brands
 
Kreg Tool KMS8000 Kreg Track and Stop Kit
Email a friendView larger image

Kreg Tool KMS8000 Kreg Track and Stop Kit

List Price: $139.99
Our Price: $132.00
You Save: $7.99 ( 5%)
SKU:

320153

In Stock
Usually ships in 1-2 business days
Description:

Trak and stop kit. The precision measuring systems kit allows you to turn your shop miter saw into a precise cutting system. Simply slide the cursor of the stop to the dimension you'd like to cut, place the board against the stop, and cut to an exact le

Features:

Trak and stop kit


The precision measuring systems kit allows you to turn your shop miter saw into a precise cutting s


Simply slide the cursor of the stop to the dimension you'd like to cut, place the board against the


You build the support wings yourself out of plywood or particle board then add the trak to the top s


Perfectly sized workpieces couldn't be simpler


Product Details:
Product Length: 33.0 inches
Product Width: 9.0 inches
Product Height: 3.0 inches
Product Weight: 0.0 pounds
Package Length: 32.1 inches
Package Width: 8.4 inches
Package Height: 2.6 inches
Package Weight: 6.9 pounds
Average Customer Rating: based on 15 reviews
Customer Reviews:
Average Customer Review: 4.5 ( 15 customer reviews )
Write an online review and share your thoughts with other customers.


Most Helpful Customer Reviews

8 of 8 found the following review helpful:

5Excellent.Aug 29, 2010
By Toolking "Paddy"
I recently built a set of extensions for my Dewalt 12" sliding mitre saw and i purchased this kit so i wouldn't have to use my tape measure at the saw station. The extensions are made from marine ply and give me eight foot to the left of the saw and six to the right. The track and stop kit arrived undamaged and i set about installing the kit on my extensions, the instruction were clear and easy to understand. Once i had the tracks mounted i zeroed in the cursors on the stops and after a few test cuts everything was as it should be.
Just a few pointers for anyone thinking about buying this kit,

(1) If you build your extensions from 3/4" ply as i did, you'll have to put a 16th of an inch shim behind the fence on your extensions because the rebate on the track is a full 3/4 of an inch. This is because 3/4 inch ply is actually 11/16" of an inch in thickness. This is something i only spotted when the tracks were mounted. If you don't shim the track back the track will stick out a 16th of an inch from the fence and any piece of stock higher than 2-1/4 inches will be 1/16" of an inch from the fence. This is a safety issue because the blade will pinch on the back of the cut and could cause kickback. Shimming the track is one way around this, using thicker ply and running it through a thicknesser until you have it 3/4" of an inch thick is another or use solid wood for the fences on your extensions.

(2) The flip stop is prone to lateral movement when heavy stock is pushed against it, i either use the production stop for heavy stock or i hold the flip stop as i push the heavy stock against it.

(3) The kit comes with four 2' pieces of track, i had to purchase another three pieces of 2' track for the right hand side of my saw. With hindsight i would have purchased at least one length of 4' track because no matter how carefully the individual pieces of track are mounted there will always be a slight offset from the end of one piece of track and the start of another. This can be overcome to some extent by placing the mounting screws as near as possible to the end of the track. The two foot pieces of track are better suited to short fences like on a drill pres table.

7 of 7 found the following review helpful:

5Best Choice for my Mobile Miter Saw StandDec 03, 2007
By Al Smith "Tn Hiker"
I've been using this product on my custom-made mobile miter saw stand which supports my Ridgid 12" sliding miter saw. After building a few major projects with the Kreg precision fence and stop kit I can report that it works great and gives 1/32" accuracy without any problems. The flip-up stop is a bit too flexible to stand up to hard lateral pushes without some "give"--especially when you are handling big heavy pieces of wood. For those cuts I prefer the "production stop" which is much more resistant to lateral forces.

I'd buy this product again and highly recommend it.

5 of 5 found the following review helpful:

5Another great product from KregJan 16, 2007
By Craig Boreth
While I agree with the minor concerns noted by the other reviewers, they are minor and don't really get in the way of this being a excellent product and a big time-saver. Solid contruction, straight-forward installation, reasonable price, and it works!! Can't ask for more than that.

7 of 8 found the following review helpful:

5Excellent for jigsDec 01, 2005
By Jason Lambert
I used this to make a fence for my miter saw. The installation of this was easy. The only problem is that you need to have the fence 2 1/4". It would have been nicer if it could have been a little bigger. Overall it works great.

4 of 4 found the following review helpful:

5Very accurrate systemDec 07, 2008
By Bobby Stanley
I purchased this system a few months ago. It works exactly as advertised. This is a very accurate and precise system if set up properly. I set mine up with about 11 foot to the left of the saw and 10 foot to the right.
One complaint. The rails are not predrilled, they have little marks where you have to predrill them. I feel they could have already done that for the price of the aluminum tracks.

See all 15 customer reviews on Amazon.com
About Us   Contact Us
Privacy Policy Copyright © , BIC Superstore. All rights reserved.
HARDWARE

Visit our full line of door parts, window parts, locks, lock sets, closers, hinges, shelf brackets, casters, etc. Choose from a variety of suppliers like Amerock products...

HOUSEWARE

We carry thousands of items like adhesives, sealants, outdoor products, paint, paint ac cessories, lighting, electrical, janitorial, building materials. Different manufacturers...

TOOLS

Your right choice for all your needs including precision, abrasives, grinding, machine, power, cutting, plumbing, welding, lubricants. Manufactured by Bosch, Delta,...

GENERAL SUPPLIES

We've got what you're looking for, Industrial & commercial products, Fasteners, safety, maintenance products, pumps, pipes, valves, fittings, heating, hvac, material handling, Construction...

Copyright 2008 Bic Superstore. All rights reserved. Website Design by Atmosphere Solutions, LLC