Home About Us Contact Us Privacy Policy Return Policy View My Cart
 

Search
Go

Category
Brands
 
Kreg Tool KMS7801 Kreg Standard Flipstop
Email a friendView larger image

Kreg Tool KMS7801 Kreg Standard Flipstop

Our Price: $36.10
SKU:

320188

In Stock
Usually ships in 3-4 business days
Only 2 left in stock, order soon!
Description:

Standard flipstop. The patented flipstop easily sets the distance between the end of the board and the saw blade for amazing cutting accuracy and repeatability. The curved design of the flipstop allows a board to bypass the stop system by simply sliding the board into the stop, thereby lifting it out of the way. The flipstop features an adjustable lens curser much like that found on a high-quality tablesaw rip fences that can be zeroed out to assure pinpoint accuracy.

Features:

Standard flipstop


The patented flipstop easily sets the distance between the end of the board and the saw blade for a


The curved design of the flipstop allows a board to bypass the stop system by simply sliding the boa


The flipstop features an adjustable lens curser much like that found on a high-quality tablesaw rip


Product Details:
Product Length: 1.63 inches
Product Width: 8.88 inches
Product Height: 5.88 inches
Product Weight: 0.0 pounds
Package Length: 8.1 inches
Package Width: 5.6 inches
Package Height: 1.7 inches
Package Weight: 0.8 pounds
Average Customer Rating: based on 6 reviews
Customer Reviews:
Average Customer Review: 3.5 ( 6 customer reviews )
Write an online review and share your thoughts with other customers.


Most Helpful Customer Reviews

5 of 5 found the following review helpful:

4Track and stop are excellent productsJun 13, 2008
By S. Griffin
I'm very happy with my Kreg track and stop system. Setting up your miter saw with stop system is mandatory in my opinion. The old tape measure/pencil mark/chase the mark and make a cut method is such a waste of time I'm amazed when I see builders doing it. Need 8 cripples at 33"? Set the stop and chop as fast as you can. And they come out perfect.

I've use the Beismeyer stops for 10 years and they work well. But they are so proud of their little stop which looks like it was made in a garage they think it's worth over $100. For that price I instead bought 2 4' kreg tracks and the flip stop. It works every bit as well was easier to set up.

So my advice--do not buy a miter saw with out also building a table, fence and kreg stop system. Sure it will take a couple hours and add $100, but it will be worth it. I'd rather have a cheaper miter saw than omit having a stop system. Any time you use a tape measure, you are wasting time.

-Steve

My only minor complaint is the flip stop has a tiny bit of play in it. We're talking a tiny little hair of play-Maybe .015 inch. So I have tightened the nut down and made it a non-fliping stop for fine cabinetry. For a constuction site and most projects, the flip stop would be the way to go, but I should have purchased the "production stop" to get the highest precision.

4 of 4 found the following review helpful:

4Kreg- flip stopJul 30, 2007
By Steven L. Johnson
I recently built a Miter saw station and added a Kreg track to the top of my fence. I put the flipstop on the leftside (my most frequently used side) and the stop block on the rightside. Both flipstop and stop block work very well as a stop block. It is so easy to use with the tape measure to reduce your measuring pains. However, the flip stop has a 1/4" offset for the cursor. While the offset for the stop block is 3/8" for the cursor? Why? They should be the same.

So what I had to do is install the tape measure for the flipstop to the left of the blade and the tape measure for the stop block to the right of the blade. Now that I think about the issue, I should have sent the stop block back and put flipstops on both sides, oh well!

The stopblock also has some other issues (I would rate only a 2) the cursors are pieces of plastic that fit into a slot on each side of the block. It is a straight slot without a stop in it, so you have to be careful how you install the plastic pieces to make sure they have 3/8" out each side. The flip stop has an end of the channel that makes it impossible to put in with any different offset than the 1/4".

6 of 7 found the following review helpful:

1flexSep 17, 2008
By William B. Scarbor
when you pay $27 for a stop block that doesn't always lock in squarely and it flexes, somethings wrong!

5 of 6 found the following review helpful:

2Significant Play in flipstopAug 21, 2008
By John Borchard "JB"
I also have found the flipstop to have play. You can tighten the nut, which decreases it, but then everything gets too tight for moving up and down. Expect more like .030 (1/32) if the stop is tight and .060 (1/16) if it is loose. I only use my production stop, the flipstop sits in its box. I am doing precision cuts - picture frame miters - and this would be far too much tolerance for me.

4Works great, Needs Better InstructionsApr 07, 2012
By JDPunch
I built a great crosscut sled using this swing stop, along with a bunch of other Kreg products (like their Top Track). Using this stop, I am able to get perfectly identical cuts on multiple pieces. I only wish that the instructions were more clear for this stop when combined with the stick-on tape measure from Kreg. Due to the slight offset of the magnified measuring indicator on the stop, I installed the stick-on measuring tape to my jig in the wrong location so my measurements are all off by a few 32nds if I use the indicator. I might have missed that in the instructions somewhere, but if it was there in the instructions, I wish it would have stood out more so I would have caught it. Otherwise, I am VERY pleased with all of the Kreg products I have ever purchased!!!'

See all 6 customer reviews on Amazon.com
About Us   Contact Us
Privacy Policy Copyright © , BIC Superstore. All rights reserved.
HARDWARE

Visit our full line of door parts, window parts, locks, lock sets, closers, hinges, shelf brackets, casters, etc. Choose from a variety of suppliers like Amerock products...

HOUSEWARE

We carry thousands of items like adhesives, sealants, outdoor products, paint, paint ac cessories, lighting, electrical, janitorial, building materials. Different manufacturers...

TOOLS

Your right choice for all your needs including precision, abrasives, grinding, machine, power, cutting, plumbing, welding, lubricants. Manufactured by Bosch, Delta,...

GENERAL SUPPLIES

We've got what you're looking for, Industrial & commercial products, Fasteners, safety, maintenance products, pumps, pipes, valves, fittings, heating, hvac, material handling, Construction...

Copyright 2008 Bic Superstore. All rights reserved. Website Design by Atmosphere Solutions, LLC