Average Customer Review:
 ( 45 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
38 of 40 found the following review helpful:
 A Convenient Socket - in Some CircumstancesNov 25, 2002
By H. Row
"in1ear"
I'm often surprised at people's expectations in a product, especially my own. You see an ad on TV and you just know how much it's going to change your life for the better.What this product does well is fits multiple shapes and sized screws and nuts for quick removal. I used it to tighten the lag bolts and screws on my son's play structure. It worked on 90 % of the hardware. I also used it in conjunction with my cordless drill to remove numerous eye hooks, bolts, screws, etc that weren't needed anymore. This would have taken several frustrating hours without the Gator Grip. What this product does less well is install bolts, screws, and nuts. It's springloaded which makes it awkward holding the hardware while installing. Just like any socket or wrench made, you need to have the tool squarely placed on the item you're using it on. Otherwise it may slip. Overall, the Gator Grip met my expectations, made certain chores easier and allowed me more leisure time with my family.
24 of 25 found the following review helpful:
 Great idea, but not sturdy enoughMay 05, 2006
By John Woods
"TObject"
For my first Gator Grip project I decided to tighten about a hundred of 5/16"x1.25" bolts to 175 inch-pounds. The bolt heads were damaged, some more than the others, making a regular socket hard to fit; this looked like a perfect Gator Grip application.
I am happy to report that the Gator Grip worked as expected. However, about 1/3 way through the job I had my first failure - one of the pins got stuck and wouldn't come out unless I remove the Gator Grip and push the pin through the other side. That pin was getting stuck continuously, and by the time I was done with 96 bolts, several of the Gator Grip pins would have the same problem.
Unfortunately, I have to testify that Gator Grip is a somewhat delicate device, and should not be used for anything but for light duty jobs.
Update: I got my Gator Grip socket replaced under warranty. The process was fast and easy. Because of that I'd give this product one more star if I could.
15 of 16 found the following review helpful:
A great gift for the Not-so-handyDec 29, 2003
By jimnypivo
"Jim Hisson"
If you know one of those poor souls whose toolbox consists of an 18" long slotted screwdriver, Grandpa's hammer, and hacksaw , then this is the essential nut and bolt tool for them.
Within six months of getting a Gator Grip for Christmas, it was indispensable in two large projects--refitting new lumber on an old rotten picnic table, and in putting up a new garage door opener.
The other reviewers are correct--it's NOT FOR EVERY JOB. Because the pins are cylindrical, it occasionally slips on the bolt head, and it lacks the gripping strength needed for working on something like your car engine. And it WILL NOT remove a nut if there is more than 1/4 inch of bolt sticking out the back end.
HOWEVER, if you are up on a ladder, and/or working with many odd-sized nuts and bolts, this tool is a Godsend. For overall home maintenance, play set assembly, garage door opener installation, or putting together knockdown furniture, it can't be beat. (I only cussed about fourteen times while installing my new Garage door opener, and that was a record!)
As a GIFT, I'd recommend this tool especially for those people who are NOT handy around the house.
This would be a great gift for the independent female in your life--the one who does the home remodeling herself, or for a couple's first home/apt. Although I haven't used it on a bike, I'd think it'd be an excellent addition to the cyclist's tool bag.
5 of 5 found the following review helpful:
 Semi-adequate for light stuffJan 02, 2008
By Evelyn White
"smokehill"
Overall this was pretty disappointing, but one has to wonder whether some industrial designer could fix its inherent flaws. It's cheaply made and has a lot of slop in it, and sometimes the spring isn't strong enough to pop the pins back into position -- pain in the neck to re-position.
It's far too inferior in quality to be used for serious mechanical work, but it might be handy if you were installing a whole bunch of big plant hangers, or something else strangely shaped.
The basic idea might be workable, but the actual tool is of the "99-cent tool bin" quality.
23 of 31 found the following review helpful:
total waste of moneyJul 26, 2002
By Wai Kin Sek
Gator Grip? more like Gator Slip. I've tried it on various things in my home and on my car and it have been completely useless. It does not provide a good "grip" of the nut and just keeps on slipping off and I have to constantly re-adjust it. It often will grip for about a half of a turn and then it slips off. Sometimes it takes a while just to make it get a grip of the nut at all.
... For $[money amount], I can just buy myself a regular set of sockets and wrench.
My recommendation would be don't waste your money and save yourself the frustration of trying to get it to work well. For all the time you waste getting it to grip and all the re-adjusting, you can find the correct sized socket and take off the nut already (you can probably put it back on and take it off again before you even take off the nut once with the Gator Grip).
See all 45 customer reviews on Amazon.com
|
based on 45 reviews
Atmosphere Solutions, LLC